This International Standard specifies methods for the measurement, determination and declaration of the noise emission from portable and stationary compressors and vacuum pumps. It prescribes the mounting, loading and working conditions under which measurements are to be made, and includes measurement or determination of the noise emission expressed as
. the sound power level under specified load conditions,
. the emission sound pressure level at the work station under specified load conditions.
It is applicable to
. compressors for various types of gases,
. oil-lubricated air compressors,
. oil-flooded air compressors,
. water injected air compressors,
. oil-free air compressors,
. compressors for handling hazardous gases (gas compressors),
. compressors for handling oxygen,
. compressors for handling acetylene,
. high-pressure compressors [over 4 Mpa (40 bar)],
. compressors for application at low inlet temperatures, i.e. below 0 °C,
. large compressors (over 1 000 kW input power),
. portable and skid-mounted air compressors, and
. rotary positive displacement blowers and centrifugal blowers and exhausters in applications u 0,2 MPa (u 2 bar).
It is not applicable to
. compressors for gases other than acetylene having a maximum allowable working pressure of less than 0,5 bar/0,05 MPa,
. refrigerant compressors used in refrigerating systems or heat pumps,
. hand-held portable compressors.

Customers who purchased DS DS/EN ISO 2151
also purchased

• ASME B46.1 : Surface Texture (Surface Roughness, Waviness, and Lay)
• ASME MFC-7M : Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
• ASME Y14.36M : Surface Texture Symbols
• ASME Y14.5 : Dimensioning and Tolerancing

See More Documents