Introduction

This document describes the portion of the Power Line or RF Physical Layer that interfaces to the Medium Access Control (MAC) Sublayer and to Layer System Management (LSM). This sublayer is called the Power Line/RF Symbol Encoding (PL/RF SE) Sublayer. The PL/RF SE Sublayer provides two primary functions:

Accepts symbol transmission requests (PH_CC_DATA.request service primitive) from the MAC Sublayer, converts the symbols into correct medium state change timing (spread spectrum waveforms), and produces requests (M_STATE.request) for state changes on the physical medium. This function is symbol encoding.

Accepts state change indications (M_STATE.indication service primitive) from the Control Channel Medium Dependent Physical (MDP) Sublayer, converts the time between state changes to symbols, and produces indications of symbol reception (PH_CC_DATA.indication) for the MAC Sublayer. This function is symbol decoding.

Figure 1-1 illustrates the lower part of the CEBus layered model with the section described by this document shaded. Shown to the left of each sublayer is the document number covering that sublayer. Between the sublayers are the service primitives that exchange information and interact with the internal state machines. Within each sublayer block is the basic unit of information handled by that sublayer. The bottom block represents the Control Channel MDP Sublayer.

The next section provides a functional description of the PL/RF SE Sublayer. Sections 3 and 4 detail the service primitives supported by this sublayer. Section 5 provides a prose description of the states, events, variables, and actions found in the PL/RF SE Sublayer state machine. Section 6 presents the state transition tables (state machine).

Customers who purchased CEA CEA-600.38
also purchased

• NEMA C12.1 : Electric Meters Code for Electricity Metering
• NEMA C12.20 : Electricity Meters 0.2 and 0.5 Accuracy Classes
• CEA CEA-600.10 : Introduction to the CEBus Standard
• CEA CEA-600.31 : Power Line Physical Layer and Medium Specification

See More Documents